P0141 heater circuit malfunction

Old Mar 19, 2008 | 11:24 AM
  #1  
00F150power5.4's Avatar
Thread Starter
|
Member
Joined: Feb 2008
Posts: 35
Likes: 0
From: Sheboygan WI
P0141 heater circuit malfunction

i have the check engine light coming on because of a heater circuit malfunction. P0141....what is that???

thanks
matt
 
Reply
Old Mar 19, 2008 | 12:14 PM
  #2  
joshmac4.6's Avatar
Senior Member
Joined: Feb 2008
Posts: 1,733
Likes: 0
From: Western NC
O2 sensor heater ckt. The heater gets the O2's up to temp so they can start "switching" faster, You will prolly need new ones.
 
Reply
Old Mar 19, 2008 | 09:27 PM
  #3  
10thGenF150's Avatar
Member
Joined: Mar 2008
Posts: 23
Likes: 0
From: South of Ky
Replace the second O2 back from the engine on passenger side
 
Reply
Old Mar 19, 2008 | 10:55 PM
  #4  
joshmac4.6's Avatar
Senior Member
Joined: Feb 2008
Posts: 1,733
Likes: 0
From: Western NC
It is recommended that you replace sensors in pairs, just replacing one at a time can cause the PCM to see major diff's and turn on the CEL again.
 
Reply
Old Mar 20, 2008 | 12:15 AM
  #5  
00F150power5.4's Avatar
Thread Starter
|
Member
Joined: Feb 2008
Posts: 35
Likes: 0
From: Sheboygan WI
Originally Posted by 10thGenF150
Replace the second O2 back from the engine on passenger side

well crap that must mean that i have a bad eliminator on that one.....they are like brand new...only about a month on both back ones...
 
Reply
Old Mar 20, 2008 | 12:16 AM
  #6  
joshmac4.6's Avatar
Senior Member
Joined: Feb 2008
Posts: 1,733
Likes: 0
From: Western NC
Originally Posted by 00F150power5.4
well crap that must mean that i have a bad eliminator on that one.....they are like brand new...only about a month on both back ones...
You are getting the 141 running MIL ELIMS?
 
Reply
Old Mar 20, 2008 | 10:04 AM
  #7  
00F150power5.4's Avatar
Thread Starter
|
Member
Joined: Feb 2008
Posts: 35
Likes: 0
From: Sheboygan WI
Originally Posted by joshmac4.6
You are getting the 141 running MIL ELIMS?

yea i am...i have eliminators on both back o2 because i have headers and high flo cats....i have extensions on the front ones..
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:14 PM.