wonderin if anyone out there knows a manufacture for a fuel cell that will accept the stock sending unit and pump, or has a system that will work otherwise?

 

HI!... You will most likely have to fabricate your own fuel cell from aluminum. That's what I'm doing. Due to the harsh emissions laws here in Canada, I have to retain all my emissions equipment. I need to re-install all the factory sensors from the factory Ford gas tank into my new fuel cell. I'll be installing mine between the frame rails at the rear where the spare tire would go. It will still retain the factory gas cap location. If your not worried about emissions then just go with a plastic fuel cell like one from RCI, JAZ etc. and go with a external AEROMOTIVE A-1000 pump and external filters, before and after the pump.

 

that's exatly where i'm putting mine at. what about the fuel gauge any way to retain that or no?

 

HI!... I'm just buying a AUTOMETER fuel sender and installing it in the fuel cell. You can buy them so they work with the factory fuel gauge. Also what I plan on doing.