97 4.2 extremely hard to start
Thread Starter
|
Junior Member
Joined: Sep 2005
Posts: 8
Likes: 0
97 4.2 any way to tell whether its a blown head gasket or a cracked head?
i have water in my oil and its not firing on the back and middle cylinders
it runs rough and is even harder to start
i sent it to a shop for a timing cover gasket and they didnt tell me that it had water in the oil when they changed it
it runs rough and is even harder to start
i sent it to a shop for a timing cover gasket and they didnt tell me that it had water in the oil when they changed it
Last edited by crroberson; Sep 1, 2005 at 11:32 PM. Reason: deleteing
Senior Member
Joined: Jul 2004
Posts: 6,200
Likes: 39
From: Easton, Pa.
Put it this way. You know you have problem that requires the heads to be removed. That's the only way to find out what has happened.
Could be head gaskets, cracked head or block.
You have a decision to make....Houston!
Could be head gaskets, cracked head or block.
You have a decision to make....Houston!
