Question about the superchips dyno chart
Thread Starter
|
Banned For Trolling
Joined: Mar 2000
Posts: 32
Likes: 0
From: Cincinnati OH 45211
Question about the superchips dyno chart
If you start the stock torque curve at 3600 and the superchips
torque curve at 3400, of course the (earlier) peak will be higher.
Why is 85% of the stock torque curve missing?
Gaston
'98 Vortech'd V6
Senior Member
Joined: Jan 2002
Posts: 813
Likes: 0
From: L-town, Michigan
They're just showing the peak values of torque.
If their chip were so hot to trot, they'd be showing all the graph and how their torque and hp were higher than stock. Perhaps they're hiding something on the low end?
If their chip were so hot to trot, they'd be showing all the graph and how their torque and hp were higher than stock. Perhaps they're hiding something on the low end?
Senior Member
Joined: Mar 1998
Posts: 1,719
Likes: 1
From: Blue Ridge Mountains, GA
My '97 4.2 V6 had a noticeable improvement at all RPM levels. They're just showing where the stock rev-limiter is removed. Even at lower RPMs, mine had slightly more power. I wouldn't believe all the mileage improvements though. I noticed a slight decrease in mileage. But then again, I kept my foot in it more also. 
Suspended For Violation of Vendor Rules
Joined: Aug 2000
Posts: 1,377
Likes: 0
From: Humble, Texas
If i had a way of getting this dyno printout on my truck you will see a performance difference. the chip made a peak of +16RWHP than without the chip. I'd imagine it gave 20-23hp which is right about where they say it does.