new starter
Thread Starter
|
Junior Member
Joined: Dec 2009
Posts: 4
Likes: 0
new starter
Just installed new starter and wont turn engine. when we jump the solonid and turn the key the engine sarts fine. 12 volts going to starter but just clicks when i turn key. Faulty starter?
Member
Joined: Oct 2007
Posts: 39
Likes: 0
From: ky
Id tr and make sure all my grounds are clean and tight and if that dosent work id try replaceing the solonid i had same prob and fixed it by a loose ground on the startor and dirty ground on frame...
Last edited by jspierson89; Dec 13, 2009 at 03:18 PM. Reason: i cant spell worth a ****
Thread Starter
|
Junior Member
Joined: Dec 2009
Posts: 4
Likes: 0
The truck started after cleaning the post and the starter relay. Now the truck wont go in to gear, we changed the tranmission (was the original Job) and have filled the trnny with fluid but wont go in to gear to move, really stumped now and I need this truck to be runnig, any help would be appriciated