driveshaft '99 vs. '98

Thread Tools
 
Search this Thread
 
Old Aug 5, 2005 | 09:49 AM
  #1  
kaker12's Avatar
Thread Starter
|
Member
Joined: May 2004
Posts: 11
Likes: 0
driveshaft '99 vs. '98

I have a driveshaft question. Thanks in advance for any help.
Would a '99 reg. cab long bed and a '98 xcab short bed use the same driveshaft?
Thanks
Kurt
 
Reply
Old Aug 5, 2005 | 10:00 AM
  #2  
Raoul's Avatar
Certified Goat Breeder
25 Year Member
Joined: Feb 1999
Posts: 6,182
Likes: 19
From: the moral high ground
All I can tell you is the wheelbase for the
1999 Regular cab longbed and the 1998 supercab shortbed is the same.
They have been the same, 1997-2003.

Wheelbases:
Reg cab shortbed 119.9"
Reg cab Long bed 138.5"
Sup cab shortbed 138.5"
Sup cab Long bed 157.1"
Crewcab shortbed 138.5"

The trucks have the same motor,tranny and rear end.
That being the case, if the wheelbase is different then the driveshaft would be different.

If the wheelbase is the same then the driveshaft would be the same.

As Bill O'rReilly would say,
"Ok professor, where am I going wrong here?"
 

Last edited by Raoul; Aug 5, 2005 at 10:03 AM.
Reply
Old Aug 5, 2005 | 02:57 PM
  #3  
kaker12's Avatar
Thread Starter
|
Member
Joined: May 2004
Posts: 11
Likes: 0
Thanks for your help...
 
Reply




All times are GMT -4. The time now is 05:50 AM.