I just installed a draw-tight hitch (My first mod!!!), question is what are the conditions that require a tranny cooler? Oddly enough, even though I have an ORP 4x4 it didn't have the tow package. (I bought it used, some little ol lady must've owned it before me. )
Also, how hard is it to install one and where is a common place to install it on the truck.

thanks for the help, I tried to search but with "search" being down it makes it kinda hard.

 

HI!... I installed a "HPP" tranny cooler and 10 inch electric fan on my truck. I also installed an external tranny filter as well. Here's a pic of just the cooler :


https://www.f150online.com/galleries...4-793-7167.jpg
https://www.f150online.com/galleries...4-793-6939.jpg
https://www.f150online.com/galleries...4-793-6937.jpg

 

Not difficult. I couldn't find fittings so I cut the line and double clamped the hoses. About 1 ounce leaked out when I cut the lines. So have a small pan ready. Got my cooler from the link below. Nice stacked plate job, about 18,000gvw.

http://www.oemfordparts.com

Mounted it driver's side about 2 inches in front of AC condensor and bottom edge on a line about 2" below where the grill bottom starts. Mounted with metal strips bolted 3 places to the metal framing that is between the condensor and the grill.

Good Luck!

Remember to get the hoses tight.

 

Thanks for the help guys. Man this board is great, don't know what I did before I found it...Oh yeah I do, I remember paying outragious dealer prices for simple work