F150online Forums

F150online Forums (https://www.f150online.com/forums/)
-   Transmissions (https://www.f150online.com/forums/transmissions-25/)
-   -   Overdrive not working after replacing snap ring and regulator valve! (https://www.f150online.com/forums/transmissions/514309-overdrive-not-working-after-replacing-snap-ring-regulator-valve.html)

Ryan Olsen 05-21-2017 05:18 PM
Overdrive not working after replacing snap ring and regulator valve!
 
So overdrive stopped working and I read all the forum posts that said replace the snap ring and the overdrive regulator valve, and over drive still is not working, does anyone have any ideas of what might still be the problem

2004 f150
2wd
4.6

Darrin Burch 05-21-2017 06:17 PM
A highly educated guess would be that you missed the pocket on the OD band with the pin on the OD servo.

D

Ryan Olsen 05-21-2017 06:25 PM
Originally Posted by Darrin Burch (Post 5218348)
A highly educated guess would be that you missed the pocket on the OD band with the pin on the OD servo.

D
I did not take out the servo so I'm fairly certain that it is in the band. Unless it can slip out somehow when pushing on the servo.

Darrin Burch 05-21-2017 06:29 PM
That would make the next most likely possibility that there is a piece of junk stuck in the valve body somewhere.

D

Ryan Olsen 05-21-2017 06:43 PM
Originally Posted by Darrin Burch (Post 5218350)
That would make the next most likely possibility that there is a piece of junk stuck in the valve body somewhere.

D
That's what I thought but I cleaned it out and I have a whole snap ring. but ill take it apart again next weekend and look. are there any other valves that contribute to overdrive other than the regulator valve?

mitymerc 06-04-2017 01:39 PM
I agree... you either missed the band pocket with the servo pin OR there is still debrs in the OD servo regulator valve.


All times are GMT -4. The time now is 05:48 AM.


© 2024 MH Sub I, LLC dba Internet Brands