Transmission hesitating to get out of first gear

Thread Tools
 
Search this Thread
 
Old Feb 15, 2011 | 12:06 PM
  #1  
mwhite0209's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2011
Posts: 3
Likes: 0
Transmission hesitating to get out of first gear

So usually in the mornings or after my truck sits, it hesitates to get out of first gear..especially on inclines. I was at a stop light the other day (on a slight incline) and i gave it gas and it reved up but wouldnt go anywhere. A transmission fault light came on and the O/D light started flashing. I put it in park and pressed the O/D button and was able to shift into gear and get going. I started the truck up after that and the fault was gone and the yellow wrench light was off. I took it to the dealer and the come back with an OSS sensor.
Now I understand that may have been the code thrown when the truck wouldn't accelerate and reved up, but how would a bad OSS sensor not like the truck go into gear? And for it to clear on its own?

Any suggestions?
 
Reply
Old Feb 15, 2011 | 12:07 PM
  #2  
glc's Avatar
glc
Senior Member
15 Year Member
Veteran: Navy
Veteran: Reserves
Joined: Dec 2006
Posts: 43,531
Likes: 817
From: Joplin MO
What year is your truck and which engine and transmission does it have?
 
Reply
Old Feb 15, 2011 | 01:11 PM
  #3  
mwhite0209's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2011
Posts: 3
Likes: 0
Originally Posted by glc
What year is your truck and which engine and transmission does it have?
sorry about that.

It's a 2004 FX4 Auto. 5.4L
 
Reply




All times are GMT -4. The time now is 07:28 PM.