1-2 shift is really fast, too fast
Thread Starter
|
Senior Member
Joined: Sep 2003
Posts: 117
Likes: 0
From: Smyrna TN
1-2 shift is really fast, too fast
Hi, I looked through 5 pages of posts and don't see anything on this.
2001, 2WD Screw, 5.4 100k miles
From a stop, it almost instantly shifts to second and then takes me up to a reasonable speed/RPM for the 2-3 shift.
If down shifts fine, no shuddering at all. Shifts are butter smooth... up and down
I bought the truck at 75k, it's always done this, I swapped fluid using mercron V.
I want to go by a trans shop for a diagnose but thought I'd ask all the folks here first. I got taken once by a trans shop a long time ago... never again
Also, I'd like to firm up the shifts, thinking of the Troyer bolt on value body or a programmer to get that and better engine perf. Any reccomendations one way or the other? Maybe do both?
Thanks guys.
2001, 2WD Screw, 5.4 100k miles
From a stop, it almost instantly shifts to second and then takes me up to a reasonable speed/RPM for the 2-3 shift.
If down shifts fine, no shuddering at all. Shifts are butter smooth... up and down
I bought the truck at 75k, it's always done this, I swapped fluid using mercron V.
I want to go by a trans shop for a diagnose but thought I'd ask all the folks here first. I got taken once by a trans shop a long time ago... never again
Also, I'd like to firm up the shifts, thinking of the Troyer bolt on value body or a programmer to get that and better engine perf. Any reccomendations one way or the other? Maybe do both?
Thanks guys.