HOW MUCH WORK WOULD I NEED TO PUT INTO MY TRUCK TO TRANSFER IT FROM 2WD TOO 4WD. IM NOT TALKING PUSH BUTTON IM TALKING FLOOR SHIFT

BEN

 

honestly, way too much. any articles i've seen on it have said that it takes too many parts to do, on that's on older ones. a new one would be ten times worse. you'd end up with a 4x4 that cost twice as much and was worth nothing because no one would buy it from you.
i would just go buy a 4x4 if that's what you want.

 

i have heard of people converting to a solid front axle with leaf springs that would be the easiest route to go other then buying a 4x4. but there will be alot of fabrication and welding to do.

 

The 4x4 and 4x2 frames are different. Sooo you will need to purchase a 4x4 frame. The munting points for the lower control arm are closer inboard on the 4x2. There is no provision for mounting the front differential. A solid axle would be the easiest and that in itself would be a royal PITA! No to say don't do it but let us know which way you want to go.

Regards

Jean Marc Chartier

 

I PROBALLY WONT DO IT BUT I HONESTLY THOUGHT YOU WOULD HALF TO CHANG OUT THE SUSPENSION AND THE DIFFERENTIAL BUT IF ITS MORE THAN TAHT TOOO MUCH FOR ME TO HANDLE. ILL JUST HAVE MY BROTHER KEEP PULLING ME OUT WITH HIS JEEP WHEN WE GO 4 WHEELIN

 

Sell your truck and buy a 4x4, you would still save money over doing a conversion.