Got a autometer trans temp gauge on the way, just wondering where is a good place to mount the sending unit, is there an existing hole on the trans? Thanks!!

 

on the 4r100, that i got, there is a plug on the drivers side just above the shifter linkage, u dont say what tranny u have but post and someone with that one might chime in, or look around the case, if ya see a plug pull it and if trans fluid comes out u should be ok...

jim

 

I T'ed into the transmission line going into the top of the radiator. This is the outgoing line from the transmission. Autometer sells a manifold that can be used for this purpose.
http://store.summitracing.com/partde...%2D2286&view=1
I just went to a plumbing shop and fashioned my own out of brass.
Jes