Hi everyone,
I'm new to forums I'm trying to figure out an issue im hoping maybe someone has had similar problem . I have a 2015 f150 that i upgraded to sync3 and since then when i start the engine about 5-10 seconds later the 360 camera view the front part goes black the main view works for front camera but if i just turn on truck dont start it the 360 veiw works and stays on i also noticed when you press the camera button i used to get main view/ zoomed view/and the a split view for the front camera now i only get one view for all 3 presses of the button i have tryed and checked all settings on forscan i have replaced camera and also IPMB module the only thing i havent been able to do is LIN calibration for IPMB it goes to 6% and stops.just asking If anyone has any suggestions or solutions it has been driving me crazy thank you in advance