2000 Lightning alignment specs
Thread Starter
|
Member
Joined: Oct 2000
Posts: 53
Likes: 0
From: Texas
2000 Lightning alignment specs
Hey guys,
Anyone know where I can pull up alignment specifications for 2000 Lightnings. I need to print a set for comparison at the front end shop
Thanks,
Jim
Anyone know where I can pull up alignment specifications for 2000 Lightnings. I need to print a set for comparison at the front end shop
Thanks,
Jim
Technical Article Contributor
Joined: Dec 1997
Posts: 9,417
Likes: 11
From: Windsor,Ontario,Canada
jakdad,
Here is what I found:
Caster LH: 6.7° RH: 7.2° Total/Split: -0.5° ± 0.7°
Camber LH: -0.5° RH: -0.5° Total/Split: 0° ± 0.7°
Toe (positive value LH: -0.05° ± 0.15° RH -0.05° ± 0.15°
is toe-in, negative Total/Split: -0.05° ± 0.25°
value is toe-out)
Regards
Jean Marc Chartier
Here is what I found:
Caster LH: 6.7° RH: 7.2° Total/Split: -0.5° ± 0.7°
Camber LH: -0.5° RH: -0.5° Total/Split: 0° ± 0.7°
Toe (positive value LH: -0.05° ± 0.15° RH -0.05° ± 0.15°
is toe-in, negative Total/Split: -0.05° ± 0.25°
value is toe-out)
Regards
Jean Marc Chartier
Last edited by JMC; Jul 18, 2002 at 06:50 PM.