does anyone know if Fabtech makes a 3.5" as well as a 3 inch spindle for our late model f-150 ?

thanks

 

No, they don't make a 3.5" spindle. If you need the extra .5" get a coil spacer. Any parts store should carry them. They call them coil isolators. All it is is a 1" piece of rubber that sits in the coil bucket andit compresses down and will give you the .5".

 

About a year and a half ago when fabtech was using the old bullseye spindles, they were 3 inch spindles. Since then, if you buy fabtech spindles, they are supposed to be 3 1/2 inch spindles. My installation instructions that came with the spindles call them 3 1/2" lift spindles. If you ever compare the new bullseye spindles and the fabtech spindles side by side, which I have, you can actually measure the difference both in lift and track as the fabtech spindles also provide more track. So to completely answer your question, fabtech does not make a 3 inch lift spindle.

 

They have 3.5" ones now? The only ones I've ever seen were 3" ones. LoL, ya learn something new everyday