Here's a couple of pix of my truck before and after lowering it.

Before


After

 

looks good! i still have to get my lazy a$$ to go buy a camera and take a few pics of my truck.

 

Looks good man!

 

Thanx 99flareside.


Here's a new pic with my new SVT Lightning wheels and F1's.

 

Looks even better now!

 

2000RegCab54,
How much space, in inches do you have left between the wheels and truck body. Front and rear. I bought my truck and it already had the lowering kit on it and the guy didn't remember how low it was lowered. I want to go down another inch front and rear but I don't know what I'm working with. So I don't know what kit I need to get. Since you have 18's with probably the same size tires(I have BFG 295-45-ZR18) and I supposedly have a Belltech 3/4 kit, it would help me find out if I really do have a 3/4 kit. My email is sgrunder@amdevcomm.com. You can see pic of my truck here, the gallery name is RoushRacing or at http://www.F150world.com/RoushRacing/ thank you for any help you can give me.

Steven

 

RoushRacing,

I'm looking at about 2 1/2 to 3 inches from the top of the tire to the top of the wheel opening. Yes, my tires are also 295/45-18's. Comparing the pictures of your truck in your photo gallery, with pics of my truck, yours looks like it's a little bit lower. Almost forgot, AWESOME Truck.

 

2000regcab54,

Thanks. Is that measure both front and back. Because thats about what I got up front but the rear of my truck has more gap than the front.

 

That's both front and back. My drivers side rear end sits a tad bit lower than the passenger side.

 

Hey both of your trucks are awesome. What's your measurement from ground to wheel well opening on either of your trucks, front and back. I'm looking to lower my Navigator and RoushRacing's truck looks about where I want to be.

 

I get my truck back from the body shop in the next couple of days, so I will let you know when I get it back.

 

Navi Man,

It's 31" front and rear on mine except for the passenger side rear sits a little higher.