Sway bar on low 03
Thread Starter
|
Member
Joined: May 2013
Posts: 18
Likes: 0
Sway bar on low 03
Lowered my truck today. Front is on DJM lower control arms, eibach springs and belltech shocks. Rear is belltech 6400 drop shackles and 2" lowering leafs (I suppose you could call them that)
When I mount the Sway bar in the front, it sits higher obviously, but when I turn the front tires squeel. So, should I cut the bolts on the Sway bar and have it mount lower? Truck sits completely dropped, needs an alignment, a lot of negative camber. But Ford doesn't like including camber adjustment bolts for the upper control arms.
When I mount the Sway bar in the front, it sits higher obviously, but when I turn the front tires squeel. So, should I cut the bolts on the Sway bar and have it mount lower? Truck sits completely dropped, needs an alignment, a lot of negative camber. But Ford doesn't like including camber adjustment bolts for the upper control arms.
Technical Article Contributor
Joined: Apr 2009
Posts: 10,697
Likes: 14
From: In the fast lane from LA to Tokyo...
