F150online Forums

Suspension
Sponsored by:
Sponsored by: CARiD

Lowering the rear of a 4x4 by removing 2" lift blocks

   
Old Jul 21, 2012 | 07:24 PM
Share
  #1  
Net Wurker's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2004
Posts: 406
Likes: 0
From: The Internet
Lowering the rear of a 4x4 by removing 2" lift blocks
Are the 2WD u-bolts something that is dealer only, or can you find them at parts stores or on-line parts warehouses?

Thanks
 
Reply
0
Old Jul 21, 2012 | 08:03 PM
Share
  #2  
Net Wurker's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2004
Posts: 406
Likes: 0
From: The Internet
OK, after some more searching around....

Are these the U-bolts I need to drop a 2004 4x4 rear 2 inches by removing the lift blocks?

http://www.stengelbros.net/361-434_p_367.html

thanks in advance
 
Reply
0
Old Jul 21, 2012 | 08:05 PM
Share
  #3  
worm5932's Avatar
Senior Member
Joined: Dec 2011
Posts: 605
Likes: 2
I went to carquest and they neasured mine and ordered some 2" shorter. They have a guy who makes them. The dealer was so confused when I asked them, they wanted a vin to order them from.
 
Reply
0
Old Jul 21, 2012 | 08:44 PM
Share
  #4  
Net Wurker's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2004
Posts: 406
Likes: 0
From: The Internet
Is yours done now? If so, does it sit level now by just removing the 2 inch lift blocks?
 
Reply
0
Old Jul 21, 2012 | 09:40 PM
Share
  #5  
worm5932's Avatar
Senior Member
Joined: Dec 2011
Posts: 605
Likes: 2
Its not done yet. Long story. However the rear sits excactly 2" higher than the front from tire to wheelwell. So it should be perfect.
 
Reply
0
Back to Subforum
Suspension
View Next Unread
New steering linkage this weekend.


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -4. The time now is 05:33 PM.