long time since I've been on here, have a problem, need some advice!
Thread Starter
|
Senior Member
Joined: Aug 2009
Posts: 516
Likes: 0
long time since I've been on here, have a problem, need some advice!
Hey everyone!!! How's everyone been ! Hopefully ya'll are doing great!!!
So here's my dilemma... I have a 05 fx4 screw with a 6" skyjacker lift and 35s.... now I know the struts that come with the kit suck, but my passanger side is sitting about .5-1" lower than my driver's side?! What gives?! I don't have the exact measurement with me, I'll tape it tonight, but what plausible causes am I looking at? It makes the passanger side rub BAD when turning into an incline where the drivers sides won't rub at all on the same incline/approach/speed.
Oh, I recently got the upper and Lower BJ's and UCA's replaced, for about a week the left side didn't rub nearly as bad, but it's horrible again.
So here's my dilemma... I have a 05 fx4 screw with a 6" skyjacker lift and 35s.... now I know the struts that come with the kit suck, but my passanger side is sitting about .5-1" lower than my driver's side?! What gives?! I don't have the exact measurement with me, I'll tape it tonight, but what plausible causes am I looking at? It makes the passanger side rub BAD when turning into an incline where the drivers sides won't rub at all on the same incline/approach/speed.
Oh, I recently got the upper and Lower BJ's and UCA's replaced, for about a week the left side didn't rub nearly as bad, but it's horrible again.