I put in my 3.5" spindles and 3" blocks. Want to add another couple inches so I'm going with an AAL for the rear (Zone Offroad). Debating on whether or not I want 2" lift coils or 1.5" spacers. Do the lift coils need a camber kit or aftermarket control arms? Do I need to pruchase the camber kit with the spacers AND get a allignment?

 

Your gonna need an alignment either way, if you only go 2" with the coils you won't need the control arms. And there is a chance you'll need the camber kit either way too.

 

Or just go all the way with 3" coils and Doetsch UCA's. You won't regret it!

 

Thats what I'd recommend, because if you only go 2" or 1.5" your just wanna go higher in the long run ha

 

either way you need those alignment bolts, thats where i messed up the first time

 

I ended up going with just the 1.5" spacers but very true about wanting to go higher. It's already started from the spindles now to the spacers and AAL