Suspension
Sponsored by:
Sponsored by: CARiD

another level kit thread

Thread Tools
 
Search this Thread
 
Old Aug 10, 2010 | 02:22 PM
  #1  
D-Mike's Avatar
Thread Starter
|
Member
Joined: Aug 2010
Posts: 17
Likes: 0
From: Natchitoches, Louisiana
another level kit thread

this question has been beaten to death, and i think i know the answer but i want to be sure. later this year i am going to be looking for a 04-08 SCREW 4x4 and i want to know if the rims i already have will work. i have eagle alloy 026 20" rim, it had +40mm offset and 6.288 backspacing. i would like to do a 2" AS and have 35s. 35x12.5R20 or 295/65R20 trail grapplers. i just want to be sure this will work before i shell out the cash. i may even look for a 2wd if it doesn't.
 
Reply
Old Aug 10, 2010 | 10:35 PM
  #2  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
I believe the 295's will work but the 35x12.50's may touch the upper control arm/ball joint due to the 6.2 inch backspacing and the Trail Grappler's aggressive sidewall.
 
Reply
Old Aug 11, 2010 | 08:03 PM
  #3  
D-Mike's Avatar
Thread Starter
|
Member
Joined: Aug 2010
Posts: 17
Likes: 0
From: Natchitoches, Louisiana
thanks, i may even go with the terra grappler in 295/60r20, they're a little cheaper and i won't be in the mud 100% of the time. im just worried ab the tires lookin tall and skinny, or short and fat. i want it to be a happy medium
 

Last edited by D-Mike; Aug 11, 2010 at 08:58 PM.
Reply
Old Aug 11, 2010 | 08:04 PM
  #4  
D-Mike's Avatar
Thread Starter
|
Member
Joined: Aug 2010
Posts: 17
Likes: 0
From: Natchitoches, Louisiana
mud*
 
Reply




All times are GMT -4. The time now is 11:54 AM.