Well I cranked the TBars today... 3 turns. It helped it out a little i think...
BEFORE

AFTER

 

Looks good!!

 

Looks better but how much more room do you have to crank them?

 

I could probably get 1-2 more turns out of it, we'll see if i try that though.

 

do more

 

I agree. I mean you have already cranked them and its still not completely level so do them 1 or 2 more and see if it looks better. Whats the worse that can happen? You dont like it and you put it back to where it was.

 

heres a before torsion bar crank for me



and heres the after of quite a few turns, still not all the way, but getting there

 

looks good man get some big meats now

 

I would go more. I cranked mine all the way up and don't have a problem with it. It leveled mine out an it sits much higher

 

Yeah I'll crank it up some more. I was just trying it out and seeing how it looked. For the guys that have cranked them, did you get them aligned afterward? And was it simply just the toe in or was it caster and camber as well?


and yeah haha definitely... these tires still have a lot of life in them... and i dont have the money

 

i was fine, until my lower ball joints went to crap after i lowered it almost all the way, and not to mention they had already needed replaced, but 180k on original lbj's isn't bad

 

Looking better

 

I cranked mine so the truck sits perfectly level (as measured). I would throw some AAL's in the rear and crank it up more, but I don't like the front driveline angles....

Assuming your angles look good, crank it up some more!

 

Looks good but agreed go a little higher

 

Yeah I will. So none of you guys' got your's aligned.... or?