Well, i have a 98 f150 4x2 and was wondering was it possible to 3/4 springs on a 1/2 truck? how much will it lift it? thanks in advance-

 

My springs are starting to sag so I was looking into doing the same thing. Check these out, haven't called to see how much lift it will give the truck but it looks like all the measurements will work. Prices seem good too.

http://www.generalspringkc.com/index...parent=78&pg=1

 

thanks ill look into that really apreciate it

 

I called the guys at generalspringkc and they said to go from the stock 3 leaf 1180lb spring to the 4 leaf 1900lb spring will add about 1 1/2 inches in ride height plus another 3/4 of an inch in the thickness of the spring pack itself. I plan on going this route in June but I am also going to get a set of 2 inch drop shackles to bring the rear back down to stock height.

He also said May 3rd the price of the 1900lb springs was gonna go up about 10 bucks each