alright thanks yea the kicker braces were like 90 on the rough country site but id like to have the extra support just for the save sake ya know, ima probley get the lift when i get ready for some new tires and do it all at one time, got to get some more milage out of my stock tires first thought

oh and one more question, i got a 2.5 inch levelin kit on the truck now, will i need it after installin the lift or with the lift make the truck seat level, or do i need to run the levelin kit with the spacers??

No you don't need in and #2 you don't want to stack spacers, very very dangerous.

oh ok i heard some people put both on there truck, but will the truck seat level with just the suspention kit on the truck, does ur truck seat level

yes

ok cool yea i want my truck to seat level if i install the lift

so some other question i thought of

is there anything i need to do with the driveshaft, will it be at to much of an angle or does it have any effect on the lift and driving???

and how is towing stuff with a lift with the 35 tires, with a stock engine,5.4 v8??

thanks

you have to do something to the front driveshaft, it's in the instructions. If you have 3.55 gears I would regear, if you have 3.73 ls gears you should be ok.

im not 100% sure on what gears i have, but if i have the 3.55 how much would it cost to regear and how would u regear??

not sure on pricing where you are but I would say 1100-2000 and take it to a shop and let them do the gears.

oh wow how can i tell what gears i have? where would i look, and if i do have the small one what will happen if u continoue to use it with the lift

Im not sure where to find what gears you have I think there is an axel code on the door jamb, but I don't know how to tell what gears. You will notice a loss of power and it will ware out your transmition pre maturally.

oh ok i need to look into that then, does 35s make that big of a difference?

ok so i looked on the papers in my truck that comes on the door window and it said i had the 3.73 gear ratio, so regearing is not an issue for me, in installing the 6 inch lift and 35s right??? the 3.73 gear is fine to work with this set up right

yes them gears will be fine. it will help alot if you get a programer exhaust and intake to gain power back.

Mratlanta
What shocks did you get with your lift because when i looked on that web site i didn't see anything on there about it comeing with shocks

oh ok thanks, really dident want to do any regearing so thats good itll work, ima probley look into exaust after words and maybe a programer pending on the cost