any pics of a 6" lift and a leving kit with 35" tires?
Thread Starter
|
Member
Joined: Apr 2009
Posts: 35
Likes: 0
From: Lakeland
i dont know what yall are talking about with the 3" level lift hitting the coil. i have a 3 in on mine now and im not hitting anything. my ball joint barely moved also. i have no problems with mine
Senior Member
Joined: Jul 2009
Posts: 672
Likes: 4
From: St. Catharines, Ontario, Canada
any pics your cv angles? I am sure they are pretty jacked up.
Senior Member
Joined: Jul 2009
Posts: 672
Likes: 4
From: St. Catharines, Ontario, Canada
does anyone have a pic of a 6" lift and a leveling kit with 35's
i am about to add a 6" lift to my truck with a 3" level kit
i dint know if it would look good with 35's because i think they will be too small. but i wanted to see some pics before i spend the extra money on 37's
i am about to add a 6" lift to my truck with a 3" level kit
i dint know if it would look good with 35's because i think they will be too small. but i wanted to see some pics before i spend the extra money on 37's
how about 8 inches on stockies
Senior Member
Joined: Jan 2008
Posts: 3,782
Likes: 0
From: N/A
When the truck is on jack stand and the tires are hanging freely it will hit the coils. What leveling kit are you running?
Thread Starter
|
Member
Joined: Apr 2009
Posts: 35
Likes: 0
From: Lakeland
im runnin a 3" ready lift spacer i just put on a 6" fabtech also...my balljoint angles aren't bad at all. the cv angles are a little steep but everything works fine. the ride is a little wierd though cause i still got 31's but as soon as i get everything done ill post some pics.
