IH8ATTN'S Lift W/PICS!
Thread Starter
|
Senior Member
Joined: Jul 2009
Posts: 672
Likes: 4
From: St. Catharines, Ontario, Canada
IH8ATTN'S Lift W/PICS!
So I finally got the itch to do a lift so here is mine. I included pics because quite frankly it ain't real unless you post pics 
It took us about 10 hours to do as we just puttered around, drank beer and took our time. Its a fabtech 6" stage 1 lift with Moto Metal 951 Chrome 20x10 with -18mm offset and 4.5 backspacing. The ride is pretty damn good and it turns alot of heads so I am happy with it. Anyways here are the pics
before...
AFTER!!
It took us about 10 hours to do as we just puttered around, drank beer and took our time. Its a fabtech 6" stage 1 lift with Moto Metal 951 Chrome 20x10 with -18mm offset and 4.5 backspacing. The ride is pretty damn good and it turns alot of heads so I am happy with it. Anyways here are the picsbefore...
AFTER!!
Last edited by IH8ATTN; Aug 30, 2009 at 11:21 PM.
Thread Starter
|
Senior Member
Joined: Jul 2009
Posts: 672
Likes: 4
From: St. Catharines, Ontario, Canada
I forgot to mention the back sits about 1/2 inch lower than the front. I was wondering if anyone has stacked a block or something in between to get that extra inch to level it off? Just trying to weigh out my options. I am planning to run bags in the back anyways so I can tow and load up without having the *** sag out.
Senior Member
Joined: Jan 2009
Posts: 470
Likes: 0
From: Texas
Trending Topics
Looks super sharp. Nice job!
Thread Starter
|
Senior Member
Joined: Jul 2009
Posts: 672
Likes: 4
From: St. Catharines, Ontario, Canada
Thanks everyone for the compliments! I have some more things I want to do but we shall see. I am planning on doing the F150 limited grill but I am wondering what colour would look better, the Arizona beige or the Oxford white?
