Suspension
Sponsored by:
Sponsored by: CARiD

hmmm..

Thread Tools
 
Search this Thread
 
Old Oct 9, 2008 | 07:02 PM
  #1  
jrussell63670's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 125
Likes: 0
From: St. Louis area
hmmm..

How much weight, or how would I find/figure out how much I can carry in the bed of my 04 fx4 screw?
 
Reply
Old Oct 9, 2008 | 07:12 PM
  #2  
burtonbrdr's Avatar
Member
Joined: Nov 2007
Posts: 43
Likes: 0
From: Encinitas
Not sure if this is what you are looking for but on the B pillar or on the drivers door, there will be a sticker that says the combined weight of occupants and cargo should not exceed a certain number of pounds. Hope this helps.
 
Reply
Old Oct 9, 2008 | 07:14 PM
  #3  
burtonbrdr's Avatar
Member
Joined: Nov 2007
Posts: 43
Likes: 0
From: Encinitas
If thats not what you are looking for, look in your owners manual in the chapter labeled tires, wheels and loading.
 
Reply
Old Oct 9, 2008 | 09:31 PM
  #4  
shindo_hikaru's Avatar
Junior Member
Joined: Oct 2008
Posts: 16
Likes: 0
What is the configuration (i.e - gear ration, wheelbase, and engine)

Payload: Combined maximum allowable weight of cargo, occupants
and optional equipment. The payload equals the gross vehicle weight
rating minus base curb weight.

Base Curb Weight: Weight of the vehicle including any standard
equipment, fluids, lubricants, etc. It does not include occupants or
aftermarket equipment.

Look at the door sticket and you will find your gvwr.

To find your Base Curb Weight, get the weight of the vehilce.
 

Last edited by shindo_hikaru; Oct 9, 2008 at 09:33 PM. Reason: Adding info.
Reply




All times are GMT -4. The time now is 09:51 AM.