Suspension
Sponsored by:
Sponsored by: CARiD

Wheel/Tire Question

Thread Tools
 
Search this Thread
 
Old May 24, 2008 | 12:43 AM
  #1  
daculatruck50's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2006
Posts: 200
Likes: 0
From: Bethlehem, GA
Wheel/Tire Question

Ok, i have a 2wd 04. I'm going to get a 6" procomp as soon as i figure out my tire situation. I wanted you guys advice. I have the OE 20's right now and i could put 305-60R20 Toyo A/T (34x12) on it or i could get chrome 18" MM 951 and 325-65R18 Nitto Terra Grappler (34x13). What are yalls opinions? I have pics of the truck in my gallary i just dont know how to post them.

Thanks,
Trent Kammerer
 
Reply
Old May 24, 2008 | 02:17 PM
  #2  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
I'd go with the Moto Metals.
 
Reply
Old May 25, 2008 | 10:17 AM
  #3  
daculatruck50's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2006
Posts: 200
Likes: 0
From: Bethlehem, GA
If i did go with the moto metals i would need the 4.5" backspacing to fit the 13" tires right?
 
Reply
Old May 25, 2008 | 10:50 AM
  #4  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Personally, I'd want at least 5 inches of bs. I believe the MM are available with 4.5, 5.7 and 6.1 inches of bs. I'd go with the model with 5.7 inches of bs unless the lift kit requires less bs.
 
Reply




All times are GMT -4. The time now is 11:09 AM.