I have an 08 FX4 Screw with the 20" wheels and Pirelli Scorpion ATR 275/55/20 tires. Im thinking about getting the 2" or 2.5" leveling kit, but dont plan on getting new tires or wheels anytime soon. Anyone have pics of a truck like this? Will it look ok? I dont want the wheels to look too small. I love the look of the wheels an tires, just want the front leveled some.

 

i got pics with 17 ill post em later

 

I had that setup for a day, except I had an AAL in the back in addition to the 2" AS. New 34" tires on all four corners (OEM wheels) made it look way better.

It didn't look too stupid, but wasn't filling out the wheels well much, either. You'll have to see it in person for yourself, IMO.

 

325/60/20 with a leveling kit

 

I ran that way for two years on my scab... here are a few pics. Its a 2.5" leveling kit on the same wheels and tires you have.

 

If you're just looking for a level ride, not necessarily looking for more lift, might be better to just remove the rear block.

 

Thanks for the pics guys! Hokie, that is just what I needed. It doesnt look too bad with the stock tires and level kit. Are those the same tires in the second pic? White wall is gone.

 

Here's another pic. This was my truck right after I installed a AS 2.5" kit on OEM 20's Plenty more pics in my gallery

 

Yeah, they are the same tires in the second pic. The white lettering is just turned black from the brake dust constantly produced by the stock front pads that were on it.

 

Thanks again guys, this really helps me. I think I will go for it. Hivoltage, nice truck, awesome gallery!