Question about rear blocks?
Registered User
Joined: Feb 2007
Posts: 231
Likes: 0
Mac,
I have some for sale from a 04-07 4x4. I know that on these models there are 2 pins on the truck and 2 holes in the block to accomadate the pins. Not sure if a 2001 has the same design. Someone should chime in. I am selling the 2" ones for $35 shipped.
I have some for sale from a 04-07 4x4. I know that on these models there are 2 pins on the truck and 2 holes in the block to accomadate the pins. Not sure if a 2001 has the same design. Someone should chime in. I am selling the 2" ones for $35 shipped.
Senior Member
Joined: Jun 2007
Posts: 237
Likes: 0
From: Dracut, MA
Originally Posted by mbogosia
Mac,
I have some for sale from a 04-07 4x4. I know that on these models there are 2 pins on the truck and 2 holes in the block to accomadate the pins. Not sure if a 2001 has the same design. Someone should chime in. I am selling the 2" ones for $35 shipped.
I have some for sale from a 04-07 4x4. I know that on these models there are 2 pins on the truck and 2 holes in the block to accomadate the pins. Not sure if a 2001 has the same design. Someone should chime in. I am selling the 2" ones for $35 shipped.
Bassmaster, ford blocks have an alignment pin in that most univeral blocks don't have. Best bet is to find a set specific for your truck.
Registered User
Joined: Feb 2007
Posts: 231
Likes: 0
Originally Posted by renaud
Sorry the thread jack, but are the 2" just the stock 4x4 blocks?
Bassmaster, ford blocks have an alignment pin in that most univeral blocks don't have. Best bet is to find a set specific for your truck.
Bassmaster, ford blocks have an alignment pin in that most univeral blocks don't have. Best bet is to find a set specific for your truck.
Yes, sorry for thread jack.