Raising rear end with just Bilstein 5100
Thread Starter
|
Senior Member
Joined: Aug 2007
Posts: 160
Likes: 0
From: Alabama
Raising rear end with just Bilstein 5100
I have a 2 inch leveling kit on th front and it seems to be just a little higher than the rear. It is diffently higher when I tow. Can I just get the Bilstein 5100 and raise the back to fix this? Thanks
Senior Member
Joined: Jan 2007
Posts: 540
Likes: 0
No because the rear shocks have nothing to do with height and are just for dampening whereas the front is a coilover where the coil sits on the shock and by adjusting the position of the coil or preload of the coil it alters the height. Look into an add a leaf or block for the rear.
Thread Starter
|
Senior Member
Joined: Aug 2007
Posts: 160
Likes: 0
From: Alabama
Originally Posted by KansasJoe
No because the rear shocks have nothing to do with height and are just for dampening whereas the front is a coilover where the coil sits on the shock and by adjusting the position of the coil or preload of the coil it alters the height. Look into an add a leaf or block for the rear.
