I would like to go the route of adding a 2" leveling kit on my 04 4x4 (I would go 2.5" but I dont like the looks of the angles!). But I also want to bring the rearend up so the truck doesn't sit perfectly level (I like the factory rake, I just want to be able to fit 35's without going the route of a lift kit). Now my question is: Should I get the 3" block or the AAL or BOTH?! I usually just haul my sled trailer and sometimes with a sled in the in the bed, or just my four wheelers and i don't want that "saggy ***" look to it while its loaded down. THANKS!

Carl

 

Yeah, your best bet is probably the 2 inch Autospring kit and an add-a-leaf. THe angles with the 2 inch kit won't be quite as extreme as with the 2.5. Or you could just add a body lift.

 

I tell you, I've been running a 2.5" for almost 2 years and I've had no issues at all. Also, my angles on my UCA's are really not that bad. Just something to think about? I'm sure others running the 2.5" kit could chime in as well.

 

i just put a 2.5 kit on and my angles are not bad at all, i would go the route of an AAL before i went with the blocks, but i don't think its gonna make a big difference