Would a 2" lift with 1.5 AAL work....or would a 2.5" with 1.5 AAL work better. I just want enough lift to clear 285/65/20 and I do some towing so I did not want the rear to sag.

 

I just put a 2.5" AS leveling kit, as well as the 1.5" AAL - Truck looks great and am putting 285/65/20s BFG on tomorrow. (along with the allignment) I'll let you know how it goes...

 

Yeah definately let me know how it turns out and post some pics if possible.

 

i just installed a 2.5" AS kit on a regular cab FX4 and the front is still about an inch lower than the rear. from what i notice, the rearend of the reg. cabs is much higher than ext. or screws. so in this case, adding a 1.5" AAL would put the truck back to being unlevel just as it is from the facotry, but a couple inches taller.

 

2.0 autospring
1.5 Skyjacker AAL
325 60 18 Nitto Tg
18x9 Helo Maxx 6

 

might look better if the front wasnt kissing the ground.

 

The pic is a little decieving, it looks really good on pavement.

I originally had a 2.5 Daystar with Bilsteins in the front, but the combo was too much lift and my ride sucked. It looked like it was lifted 6 inches. I know what you are saying though.

jrbhc8

 

jrbhc8 did the " autospring give ya 2" inches of lift or more? curious.

 

I did AS 2.5 with custom 4" block

 

AS 2.5" with AS 1.5" AAL Here: