F150online Forums

Suspension
Sponsored by:
Sponsored by: CARiD

2006 SCrew 2wd - 2" or 2.5" AS?

Thread Tools
 
Search this Thread
 
Old May 1, 2007 | 05:20 PM
Share
  #1  
ljhookem's Avatar
Thread Starter
|
Member
Joined: Apr 2006
Posts: 36
Likes: 0
From: La Porte, TX
2006 SCrew 2wd - 2" or 2.5" AS?
Any suggestions on the 2" or 2.5" Auto Spring?

Right now I only have stock 255/65/17 but that will change just a little after the front end lift.
 
Reply
0
Old May 1, 2007 | 06:51 PM
Share
  #2  
Zig's Avatar
Zig
Senior Member
15 Year Member
Joined: Dec 2006
Posts: 132
Likes: 0
From: Fullerton, CA
I have the 2.5" in mine. I figured if the front was higher than the back I could put in a block to bring it up but it sits pretty much level.
 
Reply
0
Old May 1, 2007 | 08:02 PM
Share
  #3  
kAkA_r0Ach's Avatar
Senior Member
Joined: Feb 2006
Posts: 128
Likes: 0
From: Middle of the Pacific Ocean
a guy just put some bfg 285/70/17 on his stock rig and he said theres no rubbing at all.... looked pretty good too.
 
Reply
0
Old May 4, 2007 | 11:06 PM
Share
  #4  
wxscpo's Avatar
Senior Member
Joined: Feb 2006
Posts: 2,269
Likes: 0
From: HI
I had the 2.5" kit on mine prior to the lift. It was a little taller in the front, but you couldn't tell it unless you actually measured it.
 
Reply
0
Old May 5, 2007 | 07:09 AM
Share
  #5  
hazelbalz's Avatar
Member
Joined: Sep 2004
Posts: 81
Likes: 0
From: VA
I have the 2.5 and 285/70-17 mt and it sits just right. I think the front may be just a little bit higher, but it looks almost dead on. I had the 2 before and it still sags a lil in the front.
 
Reply
0
Back to Subforum
Suspension
View Next Unread
Power Steering Box Leak Recommendations?




Advanced Search

All times are GMT -4. The time now is 01:20 AM.