Hey everyone i recently purchased an 04 2wd f150 and have had the three inch body installed. I ordered the 6 inch fabtech and am wondering if my 37 inch mud grapplers will rub or not. Should i go ahead and get the spacer and add a leafs or leave it with the nine inches? thx

andy

 

You should be able to fit 37's on a 4x2 with 9 inches of lift with the right wheel. I'd suggest something like a 9 inch wide wheel with 5.5 or 6 inches of backspacing.
Also, welcome to the site.

 

Wandell is right, you will fit with no problems. I have a 6" with 37's and I rub but I know with a 3" body you'd have no problem and with very minor trimming you will be set for good.