Alright, i have made my decision and will be placing my order for my new rims/tires. iam going with 20 x 10 moto metal 951's on a 6 x 135 bolt pattern with approximently 4.79" backspacing and -18mm offset. they will be wrapped in 35/12.50R20 nitto mud grappler tires. before i place it, i would just like a couple of confirmations that this setup will work with my 05 F150 Screw w/ a 6inch procomp lift (as far as rubbing/clearance issues are concerned). Thanks guys and i really appreciate all your help. Sorry about the constant questions. _Ryan

 

i should be able to take off my old wheels and tires, bolt the new wheels and tires on and be on my way, correct?

 

As long as the tire is a 12.50 you shouldn't run into any trouble, good choice and post some pics when done.

 

so i would have some problems if i used say a 35x13.50R20 tire?

 

You should be fine.

 

i should be fine even if i ran a 13.50 tire?

 

Yep.

 

you should be fine with that! good wheel choice welcome to the 951 club

 

Those are nice wheels.