Coils
#1
Coils
I plan on doing a 3.5 inch spindle lift with a 3 inch block in the back. But i want an extra 1.5 or 2 inches in the front. I was looking at doing the daystar, but not sure on the spacer. So if I do adjustable coils like these http://store.summitracing.com/partde...5&autoview=sku but when I install them how do I set the height that I want?
#3
I'd go with the Daystar spacers. I had a set on my Jeep for several years. They are a proven quality product at a good price. You will also more than likely need adjustable camber bolts to get your alignment within specs if you go with the 2 inches spacers. That is pretty much the limit without having to go to aftermarket upper control arms.