Suspension
Sponsored by:
Sponsored by: CARiD

Q for Wandell

Thread Tools
 
Search this Thread
 
Old Aug 24, 2006 | 03:02 PM
  #1  
chug4real's Avatar
Thread Starter
|
Member
Joined: May 2006
Posts: 98
Likes: 0
From: florida
Q for Wandell

Hello, wandell and all others with a 3" PA body lift. I am stuck between deciding on my choices, i would like to install a 3" body lift w/35" rubber but i have to tow a boat. its 4500lbs and i know i cant do that so is there another way i can get this height. i heard once about someone using an AAL off of an f-250 would that increase height. Otherwise i have to wait six more months to save enough for the 6" fabtech. Wandell i want to hear absoulutly everything you have to say. give me opinions everybody please.
 
Reply
Old Aug 24, 2006 | 04:04 PM
  #2  
Trooks2001's Avatar
Senior Member
Joined: Jan 2004
Posts: 729
Likes: 0
From: Valdosta, GA
You can tow with a Bodylift, just not by the bumper. As long as you have a trailer hitch you will be fine
 
Reply
Old Aug 24, 2006 | 04:17 PM
  #3  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Exactly. You towing capacity is not affected by the body lift, you just can't use the rear bumper to tow with. Once the rear bumper is lifted, it is not as sturdy. Therefore, you need to tow with your receiver hitch only.
 
Reply
Old Sep 7, 2006 | 04:55 AM
  #4  
Redf150-2wd's Avatar
Member
Joined: Apr 2005
Posts: 39
Likes: 0
From: Parker, TX
just get a drop down hitch, theyre not that expensive and i believe that they sell them in a 3" drop
 
Reply
Old Sep 7, 2006 | 03:03 PM
  #5  
RRT's Avatar
RRT
Senior Member
Joined: Aug 2006
Posts: 109
Likes: 0
From: Bogalusa, LA
I agree with the above.
 
Reply




All times are GMT -4. The time now is 04:36 PM.