Suspension
Sponsored by:
Sponsored by: CARiD

I installed Hotchkis TVS lowering kit yesterday

Old Apr 7, 2006 | 12:03 PM
  #1  
Scotty08's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2004
Posts: 226
Likes: 0
From: Miami OK
Talking I installed Hotchkis TVS lowering kit yesterday

I installed TVS in about 12 hours total. Would have been alittle quicker, but the driver side Shackle and hange did not want to cooperate. So I took a short cut, then after having rear leafs installed I got to looking and had to redo my short cut. That meant both leafs had to come back off again. Real Pain In The A**. But I am happy with it. As of right now I do not even know what it looks like. As it is still on jack stand, as I had to do a brake job along with it. The front is on the ground and It looks awsome.

As soon as I get some pics I will post before and after Photos. It is on a '98 f-150 for those that don't know what I drive.

Scotty
 

Last edited by Scotty08; Apr 7, 2006 at 12:11 PM.
Reply
Old Apr 7, 2006 | 03:48 PM
  #2  
Scotty08's Avatar
Thread Starter
|
Senior Member
Joined: Oct 2004
Posts: 226
Likes: 0
From: Miami OK
Talking

Here are the photos I promised.








They are listed in order of before then after, driverside first then passenger side. Let me know what you all think. I am pretty stooked, yet very tired.

Went to get aligned to day and was informed that the lower ball joints and one tierod end was shot. So I sending to shop Tuesday to have that repaired. So I really can't drive until then. Not like it should be driven anyway. The good news is my shocks will be here and on truck then, so that is a plus. That way when I get to really drive it I will knbow exactly how it will act.

SCotty
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 01:05 AM.