Lift Question

Reply Subscribe

Thread Tools

Search this Thread

Feb 14, 2006 | 03:18 PM

SKRWZ

Thread Starter

Senior Member

Joined: Aug 2005

Posts: 541

Likes: 3

From: Burlington, Ontario, Canada

Lift Question

I have a 98 F 150 4x4 that I put a full leaf in the rear and cranked up the torsion bars, can I add a 4 inch lift kit in the truck ?

Feb 14, 2006 | 03:28 PM

wandell

Senior Member

Joined: Sep 2001

Posts: 28,203

Likes: 2

From: cairo,ga

Yes.

Feb 14, 2006 | 03:47 PM

SKRWZ

Thread Starter

Senior Member

Joined: Aug 2005

Posts: 541

Likes: 3

From: Burlington, Ontario, Canada

But will i get the full 4 inches from the kit or is it 4 inches from the stock hieght ?

Because if it is 4 inches from the stock height i wouldnt get 4 inches then am i right?

Feb 14, 2006 | 03:49 PM

wandell

Senior Member

Joined: Sep 2001

Posts: 28,203

Likes: 2

From: cairo,ga

If you install a 4 inch lift, and crank the torsion bars all the way up, you should be about 4 inches taller than you are now.

Feb 14, 2006 | 04:11 PM

Johngs

Senior Member

Joined: Sep 2003

Posts: 3,053

Likes: 0

From: Aggieland, TX

What kit is it? If it uses a set of leaf springs in the rear, you will only get 4" from stock in the rear. The front will be 4 inches from where you are now.