02' Screw Rear
Thread Starter
|
Member
Joined: Mar 2002
Posts: 58
Likes: 0
From: Montana
02' Screw Rear
Hello,
Been a long time since I been back to the forum. I traded my 00' for an 02 Screw. I see in the back under the springs are 2" spacers. Can they be taken out and lets say a 1/2" spacer put in. I cranked the torsion bars on my last pickup to level it out but don't really want to this time. I don't need it higher. Is it ok to lower it like this? Does anyone know where I can get the spacers? I've searched but couldn't really find an answer. Lots of folks lifted the front.
Been a long time since I been back to the forum. I traded my 00' for an 02 Screw. I see in the back under the springs are 2" spacers. Can they be taken out and lets say a 1/2" spacer put in. I cranked the torsion bars on my last pickup to level it out but don't really want to this time. I don't need it higher. Is it ok to lower it like this? Does anyone know where I can get the spacers? I've searched but couldn't really find an answer. Lots of folks lifted the front.
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
I would just take the entire spacer out. Lift/lowering blocks are available almost everywhere. Try Advance Auto Parts, Pep Boys, Summit Racing, or 4Wheel Parts if you want a one inch block. I've never seen a 1/2 inch block.