Suspension
Sponsored by:
Sponsored by: CARiD

Font End Sag

Thread Tools
 
Search this Thread
 
Old May 4, 2005 | 09:00 PM
  #1  
Murray5309's Avatar
Thread Starter
|
Junior Member
Joined: May 2005
Posts: 2
Likes: 0
Question Font End Sag

I have a 95 F150 4x4 and i'm sure you all know the front end sits about an inch and a half lower than the back.

so heres my problem, I dont have much cash i'm a college student and my truck loves gas. so i want to get a new set of front springs with the 1.5in but i dont know where i can get them at a decent price. and i know they make spacers but i think the springs are starting to go bad at 156k. any help is apperciated.
 
Reply
Old May 4, 2005 | 10:40 PM
  #2  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
What type of spacers do you have? Do you have a solid spacer that sits on the top or bottom of spring or those cheap spacers that wedge inbetween the coils of the spring? If you have those, they probably caused your springs to sag out. A quality spacer like a Daystar would not wear out.
 
Reply
Old May 5, 2005 | 08:17 PM
  #3  
Murray5309's Avatar
Thread Starter
|
Junior Member
Joined: May 2005
Posts: 2
Likes: 0
I dont have spacers i was looking where to get either spacers or new springs all together
 
Reply
Old May 5, 2005 | 11:04 PM
  #4  
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
4Wheel Parts sells Daystar products. They probably have replacement lift springs also. If you think your springs are sagged out, new lift springs may be your best option.
 
Reply




All times are GMT -4. The time now is 12:14 PM.