Suspension
Sponsored by:
Sponsored by: CARiD

Shock Hoop

Old Mar 3, 2005 | 12:32 AM
  #1  
FLAMETIP's Avatar
Thread Starter
|
Member
Joined: Mar 2004
Posts: 30
Likes: 0
From: San Diego
Shock Hoop

HI! I have a 1999 F150 2x4 lariat with the 7.5 fabtech lift an a 3" body lift. I have been looking for a dual shock set up but havent found it. Any help would be apreciated.


Thank You.
 
Reply
Old Mar 3, 2005 | 01:20 PM
  #2  
bigtruck311's Avatar
Senior Member
Joined: Jul 2004
Posts: 3,105
Likes: 4
From: oceanside C.A.
fabteck made some a few years ago but they discontinued them i dont know why but i think it was from demand or something i looked for about a year and i havent found anybody that makes them besides a custome fab shops and that is too pricey for me, if you find somebody that makes them let me know, good luck
 
Reply
Old Mar 3, 2005 | 05:41 PM
  #3  
polarisnford's Avatar
Member
Joined: Jan 2005
Posts: 70
Likes: 0
I believe that Fabtech discontinued them because there was an issue with them pinching a line in the engine compartment. If you are lucky you can still find them on some online stores. They use to have them on truckperformance.com but i dont think they sell them anymore either. Good luck in your search.
 
Reply
Old Mar 3, 2005 | 08:32 PM
  #4  
1BADZUK's Avatar
Member
Joined: Dec 2004
Posts: 24
Likes: 0
From: TX
They ditched because the trucks were so different just by little, , i dont think t hey had there R&D done well on that setup, they told me it was because all the trucks(FORDS), were not all the same , so it might fit on one but not another, and it was a hassel, anyways that is what they told me.... could all be bs
 
Reply
Old Mar 3, 2005 | 10:27 PM
  #5  
FLAMETIP's Avatar
Thread Starter
|
Member
Joined: Mar 2004
Posts: 30
Likes: 0
From: San Diego
Thanks. I guess Ill have to make my own I was just too lazy to make them. Ill post pictures as soon as Im done.
 
Reply
Old Mar 7, 2005 | 01:09 PM
  #6  
bigtruck311's Avatar
Senior Member
Joined: Jul 2004
Posts: 3,105
Likes: 4
From: oceanside C.A.
i am enterested in how you do keep me informed on your progress if it is not to much trouble
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:40 PM.