Polyeurethane Or Rubber Coil Spacers..whats the diff?
Im looking to just level out the front with minimal cost, so it seems coil spacers would be the way to go. I called alignment shops and its about 120 to align with cams. Now the dilema is with the actual spacers...rubber is dirt cheap, polyeurethane is 80 bucks....what am I getting with either one? And the install is 120 but if I can get away cheaper Id like to try myself so tell me if I am missing something, do I need any lithium greese on this or anything?:
1. Jack up the truck with floor jacks
2. Remove the wheel
3. Drop out the shock
4. Use coil compressor and lift up coil
5. Put in spacer
6. Drop down coil, reattach shock and wheel, lower back to ground and go to aligment shop
------------------
ilmagill@aol.com For Pictures :
www.geocities.com/ilmagill
1. Jack up the truck with floor jacks
2. Remove the wheel
3. Drop out the shock
4. Use coil compressor and lift up coil
5. Put in spacer
6. Drop down coil, reattach shock and wheel, lower back to ground and go to aligment shop
------------------
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
ilmagill@aol.com For Pictures :
www.geocities.com/ilmagill
I was told from a guy at Fabtech that it's very hard to align the front end even if you use cams . I was going to use the fathech 2" coil to level out my truck but he told me that it wont align. If you dont mind your tires wearing out from the outside the coils cost 129.99 from 4x4Land or the daystar coil spaces cost 69.99 from www.Truckperformance.com
------------------
1998 F150 Triton 5.4L (4x2)
K&N Air Filter
Pioneer 4100 W/remote
2\10" Rockford Fosgate Punch XLC 2410
CatBack system with Magnaflow system 3" Pipe
------------------
1998 F150 Triton 5.4L (4x2)
K&N Air Filter
Pioneer 4100 W/remote
2\10" Rockford Fosgate Punch XLC 2410
CatBack system with Magnaflow system 3" Pipe
Alpha.
Its sucks! but yeah you cant get the 2"coils
align. If you want they will sell you the 2"coils with upper control arms for $600. but why go with 2" if for that price you can get 3" coil and control arm by them (Fabtech)
------------------
1998 F150 Triton 5.4L (4x2)
K&N Air Filter
Pioneer 4100 W/remote
2\10" Rockford Fosgate Punch XLC 2410
CatBack system with Magnaflow system 3" Pipe
Its sucks! but yeah you cant get the 2"coils
align. If you want they will sell you the 2"coils with upper control arms for $600. but why go with 2" if for that price you can get 3" coil and control arm by them (Fabtech)
------------------
1998 F150 Triton 5.4L (4x2)
K&N Air Filter
Pioneer 4100 W/remote
2\10" Rockford Fosgate Punch XLC 2410
CatBack system with Magnaflow system 3" Pipe
<font face="Verdana, Arial" size="2">Originally posted by Alpha:
Hey Nacho...Fabtech says you can't even align the 2" coils? What's up with that? Why do they sell them if they can't be aligned? Or are you refering to the spacers? Puzzled in Memphis.</font>
Hey Nacho...Fabtech says you can't even align the 2" coils? What's up with that? Why do they sell them if they can't be aligned? Or are you refering to the spacers? Puzzled in Memphis.</font>
------------------
95 F150 ext cab 4x4 orp
164,000+ miles 351
straight pipes (still not loud enough)
splitfire plugs
performance wires
31x10.50x15 grabbers
rough country shocks
tinted windows
ranch hand bumper
custom front bumper
100w rally lights
crome bed rails
autovox alarm
50 watt reverse bulbs
BAD BOYS BAD TOYS


