Suspension
Sponsored by:
Sponsored by: CARiD

Allingnment on new Lightning

Thread Tools
 
Search this Thread
 
Old Jan 10, 2000 | 03:53 PM
  #1  
Steve Marcus's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2000
Posts: 6
Likes: 0
From: Pembroke Pines, Fl.
Post Allingnment on new Lightning

I just took delivery of a new 99 Lightning. The truck doesn't track straight. I'm always correcting the steering. In the morning they are going to allign it to Lightning specs. The question is this...If I have radial pull from the tires, will the dealer take care of the problem or just tell me to call Goodyear...who I'm sure will give me a hard time.

------------------
 
Reply
Old Jan 13, 2000 | 10:31 AM
  #2  
Thunder's Avatar
Senior Member
Joined: Jan 2000
Posts: 126
Likes: 0
Post

Do a search on the lightning forum. I believe this exact problem was tackled previously. These were the posted specs
L.H. Caster: 6.9, +/- 1.0 Deg.
R.H. Caster: 7.4, +/- 1.0 Deg.
L.H. Camber: -0.5, +/- 0.7 Deg.
R.H. Camber: -0.5, +/- 0.7 Deg.
L.H. Toe: -0.05, +/- 0.15
R.H. Toe: -0.05, +/- 0.15

Also, upper A frame cam bolts are available from Specialty Products (part no. 87385)

Go search for the posts, it'll be worth your while...


------------------
Thunder
rainmaker@attglobal.net

Black 97 Expedition EB 5.4L 4WD

Mods: Lightning Wheels, Pirelli Scorpion Zero 285/55/18, K&N Gen II Kit, JET Chip

Brembo 14" disc brake kit coming right up!!!

Audio: McIntosh MX406, McIntosh MCD4000, Zapco SX-SL, Zapco EQ30, Genesis Monoblocks (3), Genesis Dual Mono, Dynaudio System 340, Dynaudio System 220, JL Audio Stealthbox


 
Reply




All times are GMT -4. The time now is 03:50 AM.