4X4 Chasis Lubrication
Can someone tell me if I am supposed to have more than one grease fitting? I have a 97 4X4.
|
knt-where is the one fitting you found. cannot find any on my 97 4x4.
|
My 97 4x4 had 2, and my 00 4x4 has 2.
jeff b. |
Farmboy, I have one on my tie rod, where is the other?
|
Check on top of the idler arm. Thats were my second one is. It is kind of tough to get to but...
Grease away https://www.f150online.com/f150board/smile.gif ------------------ '97 F150 Lariat, Flareside, white/sliver, SC, ORP, 5.4 (FQR 8/99) running Mobil 1 Mods: 305/70/16 GY ATS, AR Baja wheels, dual exhaust, Smittybilt Nerf Bars, Edelbrock IAS Shocks, K&N Filter, Carbon Fiber Bug Gaurd and rigged the fog lights too. http://www.fseries.com/photos/mytruck2.gif |
KKIRT1 is correct. If you look at the idler arm you will find one at each end. The one toward the engine is on top. I used a grease gun with a flex hose to get at that one. Now doesn't it make you feel bad when a shop tells you oil & filter for $15.95 and a grease job for $4.95 (for two fittings).
------------------ 97 F-150, 2WD, Reg Cab,Flareside,Dk Toreador Red, 4.6, 3.55 LS, EGR Bug Deflector, Gaylord Bed Cover, Bed Liner, XL Full Length Running Boards, Air Aid Kit, Gibson Single Out Cat Back, Superchips, TransGo Shift Kit, Hellwig Rear Sway Bar, Hellwig 2500# Overload Springs |
All times are GMT -4. The time now is 11:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands