Getting new brakes
Thread Starter
|
Senior Member
Joined: Jul 2001
Posts: 1,247
Likes: 0
From: El Cajon, CA
Getting new brakes
The fronts are at 30% at around 23.5k miles...
The backs are at a nice 70% so I'm leaving them alone.
Getting the rotors turned/machined as well. Only 24,000 miles on the front brakes, I knew that would be about right as I tend to race around a bit in a 5000 pound 4x4.
So whats everyone else getting?
The backs are at a nice 70% so I'm leaving them alone.
Getting the rotors turned/machined as well. Only 24,000 miles on the front brakes, I knew that would be about right as I tend to race around a bit in a 5000 pound 4x4.
So whats everyone else getting?
Senior Member
Joined: Jan 2001
Posts: 196
Likes: 0
From: Ma. No. Shore
Just had my fronts done this past week @ 40,000 miles. It was due more to one of the inside pads hanging up and not releasing than anything else. The other three pads still had life in them, but that one inside one was down to nothing.