Front Fender Emblems
Does anyone know if the Front Fender F-150 Emblems come off without leaving holes in the sheetmetal?
How about the Blue Oval and F-150 emblems on the tailgate. Tape or otherwise?
How about the Blue Oval and F-150 emblems on the tailgate. Tape or otherwise?
Looks like 2 sided tape to me. Manufacturers tend to shy away from mounting pins into barrel clips(holes drilled into the body panels) due to the rust problems that occur. Body shop should be able to confirm mounting for you.
------------------
2001Supercrew,Lariat,5.4,3.55 posi,trailer tow,Oxford white, medium graphite,bed extender,Extang tonneau,Lund hood deflector
------------------
2001Supercrew,Lariat,5.4,3.55 posi,trailer tow,Oxford white, medium graphite,bed extender,Extang tonneau,Lund hood deflector
Not sure about the crews but there are 2 pins on the back of fender and tailgate badges. They are there to align the badges.
------------------
GOLD RUSH
'99 F150 XLT SC SB 4x2 Harvest Gold
Factory[*]5.4[*]3.55 limited slip[*]Trailer towing package[*]In-dash CD player
Aftermarket[*]Ford Beanie bear[*]Slip on extender mirrors[*]Powerstop brake controller[*]Covermaster C1000 topper with wing[*]BugflectorII[*]Ventvisors (front&rear)[*]3 www.f150online.com decals[*]Ford Lumi Logo[*]Steelhorse Billet grill[*]Ford hitch cover[*]Yellow wire loom[*]Hyper White head light bulb[*]Painted to match AVS slotted taillight covers[*]Ford system 4 alarm[*]Clear turn signals[*]Fender badge on tailgate[*]"Blazer" strip reflectors under tailgate[*]FORD script antenna painted to match[*]Cup Holder courtesy lights[*]Next who knows???
<A HREF="http://www.firezap.url4life.com" TARGET=_blank>
</A>
<A HREF="http://njf150truckclub.homestead.com" TARGET=_blank>
</A>
firezap@f150fanatic.com
firezapper@home.com
[This message has been edited by Firezap (edited 09-19-2000).]
------------------
GOLD RUSH
'99 F150 XLT SC SB 4x2 Harvest Gold
Factory[*]5.4[*]3.55 limited slip[*]Trailer towing package[*]In-dash CD player
Aftermarket[*]Ford Beanie bear[*]Slip on extender mirrors[*]Powerstop brake controller[*]Covermaster C1000 topper with wing[*]BugflectorII[*]Ventvisors (front&rear)[*]3 www.f150online.com decals[*]Ford Lumi Logo[*]Steelhorse Billet grill[*]Ford hitch cover[*]Yellow wire loom[*]Hyper White head light bulb[*]Painted to match AVS slotted taillight covers[*]Ford system 4 alarm[*]Clear turn signals[*]Fender badge on tailgate[*]"Blazer" strip reflectors under tailgate[*]FORD script antenna painted to match[*]Cup Holder courtesy lights[*]Next who knows???
<A HREF="http://www.firezap.url4life.com" TARGET=_blank>
<A HREF="http://njf150truckclub.homestead.com" TARGET=_blank>
firezap@f150fanatic.com
firezapper@home.com
[This message has been edited by Firezap (edited 09-19-2000).]
there are holes back there... I replace my side ones with the same one that is on the tailgate that says supercrew.
------------------
2001 Supercrew, white/silver Lariat, gray leather capt. chairs, 5.4L, Expedition console, wood dash, cobra hood, billet grill, Ford chrome tube steps, Line-X liner, Magnaflow cat-back dual exhaust w/stainless tips, k/n filter, http://hometown.aol.com/washyourcar/supercrew.html
------------------
2001 Supercrew, white/silver Lariat, gray leather capt. chairs, 5.4L, Expedition console, wood dash, cobra hood, billet grill, Ford chrome tube steps, Line-X liner, Magnaflow cat-back dual exhaust w/stainless tips, k/n filter, http://hometown.aol.com/washyourcar/supercrew.html
Yep, there are holes. I was sooo disapointed when I discovered that! I prefer to have no logos.
------------------
2001 Supercrew 4x4 XLT Harvest Gold, 5.4L, Bed Extender, 6 disc CD changer, Limited Slip, Keyless Entry...
MODS: K&N filter, Trenz billet grille, Rhino Bed Liner...
------------------
2001 Supercrew 4x4 XLT Harvest Gold, 5.4L, Bed Extender, 6 disc CD changer, Limited Slip, Keyless Entry...
MODS: K&N filter, Trenz billet grille, Rhino Bed Liner...
I'm not sure about the side emblems, but the blue oval on the tailgate sits inside a small depression in the sheetmetal, so if you remove the oval, the tailgate will look goofy with the oval dent....at least my tailgate has this feature.....
the way I look at it the indent was put there for a few reasons: easier for the monkey to apply the blue-oval, the worst he/she could do is mount it upside down,
Someone at Ford didn't like the idea of us costomizing our vehicles and added this feature to minimize the removal of the badges.....or to make the tailgate more expensive for the aftermarket to produce and re-sell ????
------------------
Mike Mueller
Antioch, CA
'01 SuperCrew Lariat 5.4L
(White,Gray Int, 3.55 LS Diff, Line-X)
'70 914
'95 GT RTS-1
the way I look at it the indent was put there for a few reasons: easier for the monkey to apply the blue-oval, the worst he/she could do is mount it upside down,
Someone at Ford didn't like the idea of us costomizing our vehicles and added this feature to minimize the removal of the badges.....or to make the tailgate more expensive for the aftermarket to produce and re-sell ????
------------------
Mike Mueller
Antioch, CA
'01 SuperCrew Lariat 5.4L
(White,Gray Int, 3.55 LS Diff, Line-X)
'70 914
'95 GT RTS-1


