Been having issues installing acessories in my Screw bed. First a Bedrug and today a Leer cap. Was wondering if any similar owners without a bed liner could measure the inside length of their bed and let me know what they come up with. I'm trying to determine if my bed was repaired or replaced. I measured from the verticle flat area near the top of the bulkhead (front wall of the bed) to the inside back corner. If necessary, I can email pics if you need to see where I'm measuring. This is getting very frustrating.

Thanks everyone!

 

Measured 67 inches

 

Tokum,

Thanks for the reply. Could you possibly measure from the flat area at the top of your picture to the front corner of the flat area where the bed extender mounts up above the top hole up near the bed cap. I'm coming up with 61 & 3/4 on mine.

Thanks again!

 

I have a 2001 and to the inside I have 63 inches to the outside where the tailgate would close is 67 inches.

 

61 3/4 inches from the inside front to inside back across the top for mine. Night Runner, I think you are measuring from the outside of the front.