Lowered My '03
Thread Starter
|
Member
Joined: Oct 2004
Posts: 12
Likes: 0
From: Weston, Ma
Lowered My '03
I've been lurking for a number of months, but this is my first post. I pruchased and installed a DJM Inc. 2" lowering shackle kit this weekend. The installation on my '03 Supercrew was very straight-forward, I also installed two degree shims under the spring packs. I'm not sure the shims are needed, but for my piece of mind I put them in-place of the 1 degree factory shims.
The 2" kit lowered my 2 wheel drive truck to nearly level; I think if you want to make the 2 wheel drive level, I would recommend the 3" lowering shackles that DJM offer.
Just posting the information for others, as I have learned alot by reading on this forum.
The 2" kit lowered my 2 wheel drive truck to nearly level; I think if you want to make the 2 wheel drive level, I would recommend the 3" lowering shackles that DJM offer.
Just posting the information for others, as I have learned alot by reading on this forum.
Thread Starter
|
Member
Joined: Oct 2004
Posts: 12
Likes: 0
From: Weston, Ma
As promised, here are some pictures (although not very good ones
)
Nix the above; I cannot figure out how to attach images, the feature seems to be disabled. If someone could give me advice, I'll be glad to post them, thanks and sorry for the delay.
ACB
)Nix the above; I cannot figure out how to attach images, the feature seems to be disabled. If someone could give me advice, I'll be glad to post them, thanks and sorry for the delay.
ACB
Member
Joined: Nov 2004
Posts: 13
Likes: 0
From: WOODBRIDGE, VA
HEY ANTHONY.
I ALSO DID A 2'' DROP ON MY 2002 SCREW ,XLT. WITH 20'' TIRES THE DROP REALLY GAVE MY RIDE A NEW STANCE.WHAT A DIFFRENCE, MY ONLY REGRET IS NOT DOING IT SOONER. SO IF ANY ONE OF YOU GUY;S ARE THINKING ABOUT DOING IT. JUST GO FOR IT YOU WOULD NOT BE SORRY.